Visionix Weco E1.2 Auto Lens Edger


Breaking the rules again

The Weco E12 is an all-in-one patternless edging system that can satisfy all the core needs of a finishing lab. It offers drill, grooving, safety bevel, high luster polishing, and an advanced edging cycle to tackle difficult super hydrophobic lenses. Its most innovative feature is the new Gravitech® 3D Non-Contact tracing system, cutting the time to trace a lens to under 4 seconds! The addition of drilling makes the Weco E12 groove the right fit for your lab.


SKU:

Visionix Weco E1.12 Auto Lens Edger

categories:

Edging Solutions
Share:

Lens Edging, Simplified

With an intuitive interface that guides you step-by-step in every phase of the process, lens finishing has never been easier.

See Every Detail with High-Definition Imaging

The Weco E12 integrates the best optical system on the market, allowing you to center your lenses in a fully parallax-free environment. See every lens marking and engraving, even ones you can‘t see with the naked eye with its high-definition camera system.

Tackle Rimless Eyewear Effortlessly

Gravitech® 2.0 is the most advanced tracing system in eyecare. It automatically detects drill holes, notches, and slots effortlessly with minimal adjustments, making the most difficult aspect of lens processing a breez.

Trace with Precision with Gravitech

Gravitech powered tracing enables you to easily trace a demo lens in under 4 seconds! It’s exceptional accuracy and precision produces results that are superior to a traditional mechanical tracer

Block With Confidence with Gravitech

The  intuitive parallax-free , camera-assisted blocking system has been simplified to 3 easy steps that helps eliminate human error during the blocking process, decreasing the dreaded “redo” and increasing your patient satisfaction.

WIDTH : 29.4IN (747.3MM)

DEPTH : 23.6IN (600MM)

HEIGHT : 17.9IN (455MM)

WEIGHT : 143LB (65,3KG)

VOLTAGE : 230V-50HZ / 115V-60HZ

COMPLIES WITH SAFETY DIRECTIVES :

  • EN 61010-1,
  • Di 2006/42/EC,
  • Di 2014/35/UE,
  • Di 2011/65/UE,
  • Di 2012/19/UE

COMPLIES WITH EMC DIRECTIVES :

  • Di 2014/30/EC,
  • EN 61000-3-3 (EN 55016-2-3 “Classe B”),
  • EN 61000-3-2,
  • EN 61000-6-2

UL STANDARDS FOR 120 V VERSION :

  • UL/CSA 61010-1

GRAVITECH 2.0

  • Accurate optical detection of demo lenses and patterns (including drill hole detection)
  • Gravity oriented 1:1 reproduction of the demo lens
  • Shape Creator optical frame tracing for when no demo lens is available

SHAPE ADMINISTRATION

  • Job Memory: 2,000 Jobs (including Centering and Edging Parameters)
  • Shape Memory: 10,000 Shapes (including Drill Hole Parameters)
  • Shape Modification: A / B / 1/2 B/ Circumference / Radius / Axis

CENTERING

  • Single Vision, Bifocal, Trifocal, Progressive (Markings and Engravings)
  • Manual centering: Parallax-free digital blocking
  • Lens fitting check (Measured prior blocking)

EDGING

  • Processing of Glass, CR39, High Index, Polycarbonate and Trivex
  • Two Sided Measurement of lens with one touch probe
  • Multiple V-Bevel Programs
  • Polishing of Flat and V-Bevel

SPECIAL FEATURES

  • Fixed 10° grooving angle incl. different programs
  • Variable Groove width and depth
  • Chamfering: Front in one step / Back in 3 steps
  • Fixed 10° drill angle

COMMUNICATION

  • OMA V3.07
  • Remote Tracing Capability
  E12 E12 Groove
Tracing Gravitech Gravitech
Safety Bevel Yes Yes
Grooving Yes Yes
Super-Hydrophobic Lens Cycle Yes Yes
Small Eye Sizes < 21mm Yes Yes
Color LCD Display Yes Yes
Touch Screen Interface Yes Yes
High Luster Polish Yes Yes
Driling Fixed 10°